Studio Monitor Tascam VL-S5

Tascam VL-S5

Biamped design that drives woofers and tweeters through their own designated power amplifiers. The silk tweeters split by 3.2kHz crossover circuitry contributes to the delivery of a high-resolution monitoring environment. The all-encompassing biamped design drives woofers and tweeters with their own amplifiers, exhibiting excellent performance over low to high frequency sounds. Even the frequency response boasts a wide range, spanning 60Hz-22kHz.

XLR/TRS balanced-input that supports reduced-noise connections. The VL-S5 supports balanced input which is integral to the construction of a monitor environment with reduced noise. As such, it allows a balanced connection compatible with TASCAM music production devices. Furthermore, the employed design matches TASCAM music production devices, including the US-2x2. The VL-S5 matches perfectly with TASCAM products, and will deliver a music production environment with higher quality.

High-strength Kevlar LF cone and 1" Silk HF driver for superior, natural response

In the music production process, it is imperative to hear the audio quality of your tracks as purely as they were recorded. The VL-S5 system responds quickly to audio transients with high-quality driver components. The high-strength, heat-resistant Kevlar cone combined with the 1" silk tweeter faithfully reproduce every nuance of the original recorded track.

The Kevlar cone reproduces the full frequency spectrum without distortion. Softer materials used in other monitors can bend and deform during playback, giving you an inaccurate idea of what your mix actually sounds like. The silk dome tweeter provides accurate high end playback without the harsh, fatiguing sound typical of metal-domes designs.

High-strength Kevlar LF cone and 1" Silk HF driver for superior, natural response

The VL-S5 is built with transparent audio quality in mind. Each component is driven by a discrete amplifier for the cleanest possible playback. Seperate driving amplifiers also eliminate any possible electrical interaction between components – which could degrade performance.

The crossover frequency of 3.2kHz was selected after extended listening tests to ensure that seamless response is achieved. Many monitors place their crossover frequency lower around 1-2k, allowing them to use less expensive components, but this causes phase distortion in the midrange where guitars, vocals, and other critical mix elements lie. The high-quality Kevlar driver allows TASCAM to set the crossover higher without distortion for truer reproduction of rock, hip hop, EDM, acoustic, or any other music genre.

Balanced XLR / TRS input for Low Noise Connection

Electrically balanced audio connections reduce noise when interfacing audio components, especially when cable lengths are long. Noise can come from other components in the signal chain, the electrical supply to audio components, room lighting, and other sources. Noise can get mixed with signals during transmission between components on a cable, and a balanced connection can reduce or eliminate this noise. To correctly identify whether noise is caused by a previously recorded music track or the environment, noise must be excluded from the monitoring environment.

Magnetically shielded design allows safe placement near personal computers and video monitors

The VL-S5 is shielded to prevent magnetic lines of force from affecting sensitive components nearby. The highly-efficient VL-S5 speaker has a powerful magnet. With magnetic shielding, it can be installed near devices which can be affected by magnetic force - such as computer displays, hard drives, and other computer components.

Features at a glance

• Power amplifier output: LF 40W/HF 30W
• 5.25-inch Kevlar cone woofer/ 1-inch silk dome tweeter
• Specially-tuned 3.2kHz crossover circuitry
• Magnetic shielding to prevent adverse effects to computer displays
• XLR/TRS balanced input connector
• RF interference protection circuit, output protection circuit, and heat protection circuit
• Volume control

 Specs

• Type: Bass-reflex type 2-way Bi-amp-powered speaker
• Output power
  • Low-frequency: 40 W
  • High-frequency: 30 W
• Speaker unit
  • Woofer: 5,25 inch
  • Tweeter: 1 inch
• Enclosure format: Magnetically shielded
• Frequency response: 60 Hz to 22 kHz
• Crossover frequency: 3,2 kHz
• Sensitivity: 200 mV
• Balanced input
  • Connector: XLR-3-31 (1: GND, 2: HOT, 3: COLD) × 1, 1/4" (6.3mm ) TRS Phone jack (T: HOT, R: COLD, S: GND) × 1
  • Input impedance: 20 kOhm
• Unbalanced input
  • Connector: 1/4" (6,3 mm ) TS Phone jack × 1
  • Input impedance: 10 kOhm
• Power: AC 120/230V, 50/60Hz
• Power consumption: 60 W
• Dimensions (W×H×D): 176 × 255 × 200 mm
• Weight: 5,2 kg (per piece)
• Operating temperature: 5˚C to 35˚C
• Accessories: AC cable, Owner's Manual (including warranty card)

User Guide