Active speaker system kit Park Audio SPIKE 3610.05

Park Audio SPIKE 3610.05 is a set of active loudspeakers designed for professional sound reinforcement in both indoor and outdoor environments. With its compact size, high sound quality, and wide range of tuning options, the system is ideal for conference rooms, temples, karaoke bars, restaurants, and also for mobile musical groups.

The total power of the system is 1260 W, and the maximum sound pressure level reaches 125 dB. The frequency range covers from 50 Hz to 17 kHz, allowing it to accurately reproduce both low and high frequencies. The system’s directivity is 140° horizontally and 20° vertically, providing wide and even coverage of the sound area.

The system consists of two compact vertical loudspeakers VA306.05 and two active subwoofers MG110-P.05. The loudspeaker is designed using a vertical line array principle and contains six 3" FaitalPRO full-range drivers, which allow for a narrow vertical directivity pattern and reduce sound reflections from the floor and ceiling. This makes it especially effective in rooms with high reverberation levels.

The speaker housing is made of aluminum profile with steel front and rear panels, coated with powder paint. Its nominal power is 120 W, and the maximum sound pressure level is up to 98 dB at a distance of 12 meters. Due to the use of only full-range drivers, the VA306.05 does not require a crossover, which contributes to high phase linearity and low distortion levels.

The MG110-P.05 subwoofer is equipped with a 10" low-frequency driver with a ferrite magnet and has a phase-inverted acoustic design. The enclosure is made of birch plywood, coated with black water-based polymer paint. The front panel is protected by a steel grille, lined with acoustically transparent polyurethane foam on the inside. For convenient transportation, a handle is provided on the top panel, where there is also a socket for installing a stand.

Inside the subwoofer, there is a class D amplifier with 350 W of power for the subwoofer and 280 W for the satellites. The amplifier is equipped with a DSP processor, which allows precise adjustment of all system parameters: band splitting, equalization, delay, limiting, etc. Settings can be made via the LCD display with intuitive navigation using an encoder or through USB connection to a computer using the proprietary ParkControl software.

The system allows saving up to 10 user presets and has a built-in noise generator for accurate tuning in the room. Power is supplied by an impulse power source, and cooling is forced with adjustable intensity. Protection against overheating, short circuits, and the appearance of DC voltage at the output is also provided.

Thanks to the ability to adjust the height of the satellite speakers using the telescopic stand and the vertical tilt of the axis from -5° to +5° (with the optional bracket), as well as its scalability, the SPIKE 3610.05 system can work in both stereo and mono configurations, making it a versatile solution for various audio tasks.

Features

• Total power: 1260 W
• Maximum sound pressure level: 125 dB
• Frequency range: 50 Hz – 17 kHz
• Directivity: 140° horizontally, 20° vertically
• Quick-mount system
• Adjustable height of satellite speakers using the telescopic stand
• Vertical tilt of the satellite axis from -5° to +5° (optional bracket)
• Scalability: can be used in both stereo and mono configurations
• Compact vertical line array with 6 FaitalPRO drivers
• Active subwoofer with a 10-inch LF driver and phase-inverted acoustic design
• DSP processor for band splitting, equalization, and delays
• Up to 10 user presets
• Built-in noise generator for tuning in the room
• Forced cooling with adjustable intensity
• USB connection for setup via ParkControl software